Rainbow Electronics GM862-GPS - Manual (Page 30)

GM862-GPS Software User Guide
1vv0300729 Rev. 5 - 05/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved page 30 of 120
To answer the call:
•
Send command ATA<cr>
•
wait for response:
Response Reason Action
CONNECT 9600 The incoming call was a DATA
one and called modem is now
on line. exchange data..
ERROR No incoming call is found, call
may have been lost call lost
NO CARRIER The incoming call was a DATA
one and the modem
handshaking has not been
successful check for mobile registration
and signal strength and modem
settings.
OK The incoming call was a VOICE
call and is now active. proceed ahead
TIP: The call is answered with the appropriate type (VOICE or DATA) regardless of the
+FCLASS setting active. To distinguish between Data and Voice see the command response or
the extended format incoming call indication.