Rainbow Electronics AT25040A User Manual

Spi serial automotive eeproms, Prom, Features

Advertising
background image

1

Features

Serial Peripheral Interface (SPI) Compatible

Supports SPI Modes 0 (0,0) and 3 (1,1)

Medium-voltage and Standard-voltage Operation

– 5.0 (V

CC

= 4.5V to 5.5V)

– 2.7 (V

CC

= 2.7V to 5.5V)

3.0 MHz Clock Rate (5V)

8-byte Page Mode

Block Write Protection

– Protect 1/4, 1/2, or Entire Array

Write Protect (WP) Pin and Write Disable Instructions for
Both Hardware and Software Data Protection

Self-timed Write Cycle (10 ms max)

High Reliability

– Endurance: One Million Write Cycles
– Data Retention: 100 Years

8-pin PDIP and 8-lead JEDEC SOIC Package

Description

The AT25010A/020A/040A provides 1024/2048/4096 bits of serial electrically eras-
able programmable read only memory (EEPROM) organized as 128/256/512 words of
8 bits each. The device is optimized for use in many automotive applications where
low-power and low voltage operation are essential. The AT25010A/020A/040A is avail-
able in space saving 8-pin PDIP and 8-lead JEDEC SOIC packages.

The AT25010A/020A/040A is enabled through the Chip Select pin (CS) and accessed
via a 3-wire interface consisting of Serial Data Input (SI), Serial Data Output (SO), and
Serial Clock (SCK). All programming cycles are completely self-timed, and no sepa-
rate ERASE cycle is required before WRITE.

BLOCK WRITE protection is enabled by programming the status register with one of
four blocks of write protection. Separate program enable and program disable instruc-
tions are provided for additional data protection. Hardware data protection is provided
via the WP pin to protect against inadvertent write attempts. The HOLD pin may be
used to suspend any serial communication without resetting the serial sequence.

SPI Serial
Automotive
EEPROMs

1K (128 x 8)

2K (256 x 8)

4K (512 x 8)

AT25010A
AT25020A
AT25040A

Preliminary

SPI, 1K Serial
E

2

PROM

Pin Configurations

Pin Name

Function

CS

Chip Select

SCK

Serial Data Clock

SI

Serial Data Input

SO

Serial Data Output

GND

Ground

VCC

Power Supply

WP

Write Protect

HOLD

Suspends Serial Input

8-pin PDIP

1

2

3

4

8

7

6

5

CS

SO

WP

GND

VCC

HOLD

SCK

SI

8-lead SOIC

1

2

3

4

8

7

6

5

CS

SO

WP

GND

VCC

HOLD

SCK

SI

Rev. 3402A–SEEPR–10/3/03

Advertising