Rainbow Electronics 78M6631 - Manual

78M6631
3-Phase Power-
Measurement IC
DATA SHEET
DS_6631_056
Rev 1 1
DESCRIPTION
The Teridian™ 78M6631 is a highly integrated 3-phase
power measurement and monitoring system-on-chip
(SoC), with a 10 MHz 8051-compatible MPU core and
Single Converter Technology® containing a 22-bit delta-
sigma converter and 32-bit compute engine (CE). The
78M6631 has been designed specifically for a wide
variety of applications requiring 3-phase power and
quality measurements. It supports both Delta and Wye
configurations.
At the measurement interface, the device provides six
analog inputs including three differential current and three
voltage for interfacing to current and voltage sensors. The
device provides better than 0.5% accuracy over a wide
2000:1 dynamic range.
The integrated MPU core and 128 KB of flash memory
provide a flexible means of configuration, post-
processing, data formatting, interfacing to host processor
via a UART or SPI interface, or using DIO pins for LEDs
or relay control. Complete firmware is available from
Maxim and can be loaded into the IC during
manufacturing test.
FEATURES
• < 0.5% Watt Accuracy Over 2000:1 Current
Range and Over Temperature
• Exceeds IEC 62053/ANSI C12.20 Standards
• Voltage Reference < 40 ppm/°C
• Six Analog Inputs Supporting 3-Phase Voltage
and Current Measurement Inputs
• Pin- or Biselectable Delta or Wye Configuration
• 22-Bit Delta-Sigma ADC with Independent 32-
Bit Compute Engine (CE)
• 8-Bit MPU (80515), One Clock Cycle per
Instruction with 4 KB MPU XRAM
• 128 KB Flash with Security
• 32 kHz Time Base with Hardware Watchdog
Timer
• UART, I 2 C, and High-Speed Slave SPI Host
Interface Options
• 17 General-Purpose 5 V Tolerant I/O Pins
• Packaged in a RoHS-Compliant (6/6)
Lead(Pb)-Free 56-Pin TQFN
• Application Firmware Includes (per Phase):
o True RMS Current and Voltage Calculations
o Active, Reactive, Apparent, Fundamental,
and Harmonic Power Calculations
o Fundamental and Harmonic Current and
Voltage Calculations
o Line Frequency and Power Factor
Calculations
o Phase Compensation (±18° at 60 Hz)
o Built-In Calibration Routines
o Programmable Alarm Thresholds
o Command Line (UART) Communications
o High-Speed SPI Communications
Teridian is a trademark and Single Converter Technology is a registered trademark of Maxim Integrated Products, Inc.
19-6039; Rev 1; 1/12