Rainbow Electronics GC864-PY - Manual (Page 25)

Telit GE864 and GC864 Product Description
80273ST10008a Rev. 14 - 18/09/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 25 of 62
3 Evaluation Kit
In order to assist you in the development of your Telit GE864 / GC864 module based application, Telit can
supply the EVK2 Evaluation Kit with appropriate power supply, SIM card housing, RS 232 serial port
level translator, direct UART connection, Handset, Headset and Hands-free (car kit) audio, antenna.
The
EVK2 provides a fully functional solution for a complete data/phone application.
The standard serial RS232 9 pin connector placed on the Evaluation Kit allows the connection of the
EVK2 system with a PC or other DTE.
The development of the applications utilizing the Telit GE864 / GC864 module must present a proper
design of all the interfaces towards and from the module (e.g. power supply, audio paths, level
translators), otherwise a decrease in the performances will be introduced or, in the worst case, a
wrong design can even lead to an operating failure of the module.
In order to assist the hardware designer in his project phase, the
EVK2 board presents a series of
different solutions, which will cover the most common design requirements on the market, and which
can be easily integrated in the OEM design as building blocks or can be taken as starting points to
develop a specific one.
GE864 Evaluation Kit
For a detailed description of the
Telit Evaluation Kit refer to the documentation provided with the Telit
GE864 / GC864 Hardware User Guide and EVK2 User Manual.