Rainbow Electronics AT45DB321B - Manual (Page 12)

12
AT45DB321B
2223D–DFLASH–10/02
Note: 1. After power is applied and V
CC
is at the minimum specified datasheet value, the system should wait 20 ms before an opera-
tional mode is started.
Note: 1. I
cc1
during a buffer read is 20mA maximum.
Absolute Maximum Ratings*
Temperature under Bias ................................ -55 ° C to +125 ° C *NOTICE: Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Storage Temperature ..................................... -65 ° C to +150 ° C
All Input Voltages
(including NC Pins)
with Respect to Ground ...................................-0.6V to +6.25V
All Output Voltages
with Respect to Ground .............................-0.6V to V
CC
+ 0.6V
DC and AC Operating Range
AT45DB321B
Operating Temperature (Case)
Com. 0 ° C to 70 ° C
Ind. -40 ° C to 85 ° C
V
CC
Power Supply (1) 2.7V to 3.6V
DC Characteristics
Symbol Parameter Condition Min Typ Max Units
I
SB
Standby Current CS, RESET, WP = V
CC
, all inputs
at CMOS levels
2 10 µA
I
CC1
(1) Active Current, Read
Operation f = 20 MHz; I
OUT
= 0 mA;
V
CC
= 3.6V
4 10 mA
I
CC2
Active Current,
Program/Erase Operation V
CC
= 3.6V 15 35 mA
I
LI
Input Load Current V
IN
= CMOS levels 1 µA
I
LO
Output Leakage Current V
I/O
= CMOS levels 1 µA
V
IL
Input Low Voltage 0.6 V
V
IH
Input High Voltage 2.0 V
V
OL
Output Low Voltage I
OL
= 1.6 mA; V
CC
= 2.7V 0.4 V
V
OH
Output High Voltage I
OH
= -100 µA V
CC
- 0.2V V