Rainbow Electronics BR24L02FVM-W - Manual (Page 14)

BR24L02-W / BR24L02F-W / BR24L02FJ-W /
Memory ICs BR24L02FV-W / BR24L02FVM-W
14/25
2) Software reset
Please execute software reset in case that the device is an unexpected state after power up and / or the command
input need to be reset.
There are some kinds of software reset. Here we show three types of example as follows.
During dummy clock, please release SDA bus ( tied to V
CC by pull up resistor ).
During that time, the device may pull the SDA line LOW for Acknowledge or outputting or read data.
If the master controls the SDA line HIGH, it will conflict with the device output LOW then it makes a current overload.
It may cause instantaneous power down and may damage the device.
Fig.14-(a) DUMMY CLOCK
×
14
+
START
+
START
COMMAND
COMMAND
1 2 14 13
SDA
DUMMY CLOCK × 14 START × 2
SCL
Fig.14-(b) START
+
DUMMY CLOCK
×
9
+
START
COMMAND
COMMAND
1 2 8 9 SCL
SDA
DUMMY CLOCK × 9 START START
Fig.14-(c) START
×
9
COMMAND
COMMAND
1 2 3 7 8 9 SCL
SDA
START
×
9
∗
COMMAND starts with start condition.