Rainbow Electronics MAX1617A User Manual

Max1617 a, General description, Applications

Advertising
background image

________________General Description

The MAX1617A (patents pending) is a precise digital ther-
mometer that reports the temperature of both a remote
sensor and its own package. The remote sensor is a
diode-connected transistor—typically a low-cost, easily
mounted 2N3904 NPN type—that replaces conventional
thermistors or thermocouples. Remote accuracy is ±3°C
for multiple transistor manufacturers, with no calibration
needed. The remote channel can also measure the die
temperature of other ICs, such as microprocessors, that
contain an on-chip, diode-connected transistor.

The 2-wire serial interface accepts standard System
Management Bus (SMBus®) Write Byte, Read Byte, Send
Byte, and Receive Byte commands to program the alarm
thresholds and to read temperature data. The data format
is 7 bits plus sign, with each bit corresponding to 1°C, in
two’s complement format. Measurements can be done
automatically and autonomously, with the conversion rate
programmed by the user or programmed to operate in a
single-shot mode. The adjustable rate allows the user to
control the supply-current drain.

The MAX1617A is nearly identical to the popular MAX1617,
but has improved SMBus timing specifications, improved
bus collision immunity, software manufacturer and device
identification available via the serial interface, and a power-
on reset function that can force a reset of the slave address
via the serial interface.

________________________Applications

Desktop and Notebook

Central Office

Computers

Telecom Equipment

Smart Battery Packs

Test and Measurement

LAN Servers

Multichip Modules

Industrial Controls

____________________________Features

Two Channels: Measures Both Remote and Local
Temperatures

No Calibration Required

SMBus 2-Wire Serial Interface

Programmable Under/Overtemperature Alarms

Supports SMBus Alert Response

Supports Manufacturer and Device ID Codes

Accuracy

±2°C (+60°C to +100°C, local)
±3°C (-40°C to +125°C, local)
±3°C (+60°C to +100°C, remote)

3µA (typ) Standby Supply Current

70µA (max) Supply Current in Auto-Convert Mode

+3V to +5.5V Supply Range

Small 16-Pin QSOP Package

MAX1617

A

Remote/Local Temperature Sensor

with SMBus Serial Interface

________________________________________________________________

Maxim Integrated Products

1

MAX1617A

SMBCLK

ADD0 ADD1

V

CC

STBY

GND

ALERT

SMBDATA

DXP

DXN

INTERRUPT
TO

µ

C

3V TO 5.5V

200

0.1

µ

F

CLOCK

10k EACH

DATA

2N3904

2200pF

___________________Pin Configuration

16

15

14

13

12

11

10

9

1

2

3

4

5

6

7

8

N.C.

N.C.

STBY

SMBCLK

N.C.

SMBDATA

ALERT

ADD0

N.C.

TOP VIEW

MAX1617A

QSOP

V

CC

DXP

ADD1

DXN

N.C.

GND

GND

Typical Operating Circuit

19-4508; Rev 0; 1/99

PART*

MAX1617AMEE

-55°C to +125°C

TEMP. RANGE

PIN-PACKAGE

16 QSOP

EVALUATION KIT MANUAL

FOLLOWS DATA SHEET

Ordering Information

SMBus is a registered trademark of Intel Corp.

*

U.S. and foreign patents pending.

Patents Pending

For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.

Advertising