BabyTrend LB10055 - HYBRID NO BACK BOOSTER CAR SEAT - HELLO KITTY - Manual (Page 10)

17 18
7.0
Booster Seat
Installation and Use
7 . Check fit of the vehicle seat belts on child:
- Vehicle seat belt must be snugly adjusted
on child.
- Vehicle lap belt must be low on hips
contacting the thighs.
- Vehicle shoulder belt must contact the
chest and be centered on the shoulder.
Use the shoulder belt positioner to adjust
the position of the vehicle shoulder belt.
- DO NOT place vehicle shoulder belt
under child’s arm or behind child.
WARNING!
• Discontinue use of Booster Seat when top of child’s ears
are above top edge of vehicle head rest and vehicle seat back.
To remove your child:
1. Unbuckle vehicle seat belt and remove your child.
5. Snugly adjust the vehicle’s lap/shoulder belt around your child
according to the instructions in the vehicle owner’s manual.
6. Place vehicle shoulder belt in Vehicle Shoulder Belt Positioner and
adjust Shoulder Belt Positioner to position shoulder belt onto child’s
shoulder. See “Use and Adjustment of Shoulder Belt Positioner”
section.
- Thread harness strap through
Vehicle Shoulder Strap Positioner
as shown.
- Pull up or down on the
webbing adjuster until the
vehicle shoulder belt is
centered over the child’s
shoulder.
- Check to be sure vehicle
shoulder belt is properly
positioned over shoulder and
snug against child.
NOTE: Some vehicle shoulder belts with emergency locking
retractors allow child to pull belt out and change position of
belt. Use of shoulder belt positioner helps maintain proper
position of shoulder belt.
7.0
Booster Seat
Installation and Use