BabyTrend LB10055 - HYBRID NO BACK BOOSTER CAR SEAT - HELLO KITTY - Manual (Page 13)

23 24
Passive Restraint - Lap Belt with Motorized
Shoulder Belt:
DO NOT use a vehicle shoulder belt that
moves along a track. These systems
typically move to surround the occupant
when the door is closed. This type of
vehicle belt system will NOT adequately
restrain the Booster Seat.
If you have any of the above vehicle seat belt systems, DO NOT use
it to secure the Booster Seat in the vehicle. Look in the vehicle for a
location that has a more suitable vehicle seat belt system as described
in the “Vehicle seat belt Systems that are Adequate for installation
of Booster Seat” section. You may also contact your vehicle’s
manufacturer to inquire about installing a seat belt system that is
adequate to restrain a Booster Seat.
8.0
Vehicle Seat Belts
9.1 Assembly of Vehicle Shoulder Belt Positioner:
• Attaching the Shoulder Belt Positioner
Assembly to Booster Base:
- Lay Shoulder Belt Positioner
out on flat surface with free end
on top.
- Slide loop end down through one of the
slots at the back edge of the seat base.
- Thread the Shoulder Belt Guide and
free end of the Shoulder Belt Positioner
through the loop on the loop end and
pull to elimiate any slack.
Note: The Shoulder Belt Guide
should be positioned so that the
free end of the Shoulder Belt
Positioner faces the front seat.
9.0
Operation and Adjustments
Free end
Loop end