BabyTrend FB60408 - TRENDZ FASTBACK 3-IN-1 CAR SEAT - JELLY BEAN - Manual (Page 29)

55 56
12.0
Securing High-Back Booster Seat in Vehicle
12.0
Securing High-Back Booster Seat in Vehicle
2. Center the harness and slip it
underneath the tabs on the inside of
the seat. Wrap the loose ends of the
harness strap around to the front of
the seat and pull firmly to eliminate
slack. Unfold the seat back until it
locks into place. (Fig 56-1)
3. Insert the buckle tongues into the
Crotch Buckle. Thread the harness
through the slots on the buckle tongues
and the chest clip as shown. (Fig 56-2)
4. Lift the fabric flap and thread the ends
of the harness straps through the
harness slots. (Fig 56-3)
12.1.2 Built-in Safety Harness Storage
• Store safety harness in a safe place
where it is not exposed to the elements
or water. NEVER use a damaged
safety harness. Always check for
damage before use. (See Section
13.0 Care and Maintenance)
• Store the Crotch Buckle by pushing it
through the slot and tucking it away in
the empty space under the Seat Pad.
Store the Harness Adjuster Strap and
the Harness Connector Plates by tucking
them away in the same space. (Fig. 55-1)
12.1.3 Reinstalling the Built-in Safety Harness
1. Facing the Car Seat, lift the Fold Lock
Levers and pull the back of the Car
Seat gently forward. (Fig 55-2)
55-1
55-2
56-1
56-2
56-3
Harness slots