Preparing car seat for use – BabyTrend FB60408 - TRENDZ FASTBACK 3-IN-1 CAR SEAT - JELLY BEAN User Manual

Page 8

Advertising
background image

13

14

Booster Seat Mode WITHOUT Built-in Safety Harness

• Select a vehicle seating location with a lap/shoulder belt.
• Never use a vehicle seating location with only a lap belt.

Note: See section 8.0 Selecting a Vehicle Seat Location for more

information

4.4 Proper Use Check List

Toddler Car Seat (WITH Built-in Safety Harness)

Car seat is securely installed in vehicle.

The correct belt routing for installation is used based on use of tether.

Top Tether is used, when possible.

Harness straps are in harness slots at or above child’s shoulders.

Harness is snugly adjusted around child.

Booster Car Seat (WITHOUT Built-in Safety Harness)

Lap and shoulder belts are snugly adjusted around child.

Lap belt is low and flat on hips and contacting thighs.

Shoulder belt is centered on shoulder.

Child is sitting up, not slouching down under vehicle lap belt.

Shoulder belt is not under arm or behind back of child.

Top of child’s ears are below top of vehicle seat back or

vehicle headrest.

4.2 Determine the Use Mode and Prepare the Car Seat

Toddler Car Seat WITH Built-in Safety Harness

“between 22 and 70 lbs” (10 and 31.7 kg)

- Use Body Insert with smaller child.

- Harness strap height must be at or above child’s shoulder.

- Adjust the harness strap height to fit your child

High-back Booster Car Seat WITHOUT Built-in Safety

Harness “between 30 and 100 lbs” (13.6 and 45.3 kg)

- Remove the harness system for Booster Car Seat Use

- Remove Body Insert.

- Adjust back support for your child

- Adjust head support for your child

Backless Booster Car Seat WITHOUT Built-in Safety

Harness “between 40 and 120 lbs” (18.1 and 54.3 kg)

- Remove Back Support

Note: See Weight and Height Limitations section for more information

4.3 Select a Vehicle Seating Location

to Install the Car Seat

WITH Built-in Safety Harness

• Select a vehicle seating location with a tether anchor, if available. Baby

Trend requires using the tether for installation whenever possible.

4.0

Preparing Car Seat for Use

4.0

Preparing Car Seat for Use

Advertising