American Car Craft Dodge Challenger Grille Lower Trim Ring Polished 2011-2013 - Manual

AMERICAN CAR CRAFT INSTRUCTION
2011-2012 CHALLENGER LOWER GRILLE TRIM RING
PART # 152018 patent pending
PARTS INCLUDED:
1-Stainless Lower Grille Trim Ring
1-Length of 1/8” Chrome Molding
1-Adhesive Promoter Pack
1-Adhesive Promoter Tube
This new trim ring has been designed to offer a really nice finish to the front bumper
grille opening. It’s the part you didn’t realize was missing until you have installed it and
it has been made especially to enhance our factory lower grill overlay.
Your new accessory comes to you with a protective liner. This liner will help to keep
your new parts clean during installation. You will be instructed when to remove the liner
during the detailed installation.
1. Thoroughly scrub clean the bumpers insert area with household Isopropyl Alcohol
(or rubbing alcohol) to remove any and all road grime and waxes.
2. Once properly cleaned take a piece of test masking tape and stick the test tape strip
to the area in where you will be mounting your new trim. Test several areas, if it is tacky
and sticks then proceed to the next step. If it is not sticking very well in any of the spots
you tested then re-clean the area until the test strip sticks to all areas. If the test strips
tape doesn't stick well neither will your new trim piece.