American Car Craft Corvette Fuel Rail Covers Replacement Style Illuminated 2008-2013 C6+GS - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
C6 2008-2013 LS3 FUEL RAIL COVERS Lit PERFORATED REPLACEMENT STYLE
PART #043052
Parts Included:
2- Stainless Installation Brackets w/Velcro attached
1-3/8” Vacuum Cap
1-Adhesive Promoter Packet
1-Decrorative Chrome Oil Cap Cover
1-Decorative Chrome Cap w/ butyl attachment putty
2- Stainless Perforated Replacement Covers
1-Switch Bracket (switch is not included)
1_Fuse Holder with fuse
Liner Information: Your new accessories will come to you with a protective surface liner. Leave this liner in place until
the installation is complete to prevent finger prints and or possible scratches during installation.
1. Remove the two factory fuel rail covers and set aside.
2. Starting with the driver’s side remove the two bolts securing the factory fuel rails to the plenum and
set aside for a moment. You have been supplied with two identical installation brackets. These
brackets come to you flat and have been designed in such a way as to allow you to bend them by hand