American Car Craft Corvette Fuel Rail Covers Replacement Style Illuminated 2008-2013 C6+GS User Manual
Page 3
7. These fuel rail come pre wired with quick connectors on each side of the fuel rail towards the back of
the fuel rail. You will need to make a wiring harness to make the power and ground reach the furl rails.
You can use your hood seal and tuck the wires in between your wiper cowl plastic and your hood seal,
so that the wires are not visible. You can get your ground and power from the battery on the passenger
side of the vehicle. You have also been provided with a fuse holder with a 7.5 amp fuse, connect this to
the battery and then your power lead from the fuel rails to this fuse. Route your wire to the switch and
battery and enjoy your lights!!!
8. Any question during the install just call.
American Car Craft LLC
18924 Sakera Rd Hudson, FL. 34667
Ph 727.861.1500 Fax 727.861.1520