American Car Craft Corvette Stingray Hood Vent Grille Laser Mesh Polished 2014+ C7 User Manual
Page 2
4. Before you attach the grill scuff the sides of the hood vent with the small scotch pad provided and then swipe
that area with the adhesive promoter provided. Now that you have a good idea of how the grill will mount
remove the red liner from the attachment tape and carefully set the grill in place pressing along the tabs to set
the grill to the hood vent. Take your time here to make sure the grill attached nice and strait and perfectly
centered. The attachment tape is very aggressive and will not allow you to lift the grill off and reset it without
damaging or warping the grill. So go slow and sure to set it just right.
5. Once the grill has been successfully mounted simply snap the vent shroud back in place and reinstall the two
screws to finish the installation.
If any questions or problems occur during installation, please contact American Car Craft at
727-861-1500.
Thank You and Enjoy Your Purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520