Peterson StroboPlus HD Metronome Manual - Manual (Page 3)

Headphone Output
The internal speaker will be shut off and the output will be sent to headphones or an external PA system from
the 3.5 mm jack when a plug is inserted.
Vibe Clip™ Output
The Vibe Clip allows metronome beat delivery via tactile pulses and is available through our Online Store.
USB/Power Socket
This socket can be used to power or recharge the StroboPlus internal battery from any standard 5V cell phone-
style charger with a micro USB connector or from the USB connection on a computer. The socket is also used
to connect to the Peterson website for updating the firmware or uploading custom settings or configurations for
the StroboPlus and for uploading Tempo Maps.
Thru/Output Jack ¼”
The Input Jack’s signal will be routed to this jack for output to an amplifier or other sound equipment.
Volume Control
This control adjusts the volume of the audio including metronome clicks.
Input Jack ¼”
To tune, plug the instrument output cable, external microphone, or a Peterson “TP” vibration tuning pickup into
this input jack.
USER INTERFACE
How to Turn StroboPlus™ On
Press and hold the Power Button until your StroboPlus powers on. If the battery is drained, StroboPlus will
require a few minutes of charge time before it can be powered on.
How to Turn StroboPlus Off
Press and hold the Power Button for two seconds.
Mode Select
The Mode Button selects what mode the StroboPlus™ is currently operating in. Three modes are possible:
Strobe Tuner, Audio Tuner, or Metronome.