Peterson BBS-1 BodyBeat Sync - Manual (Page 8)

-8-
Sync Control
Activates the current Sync Mode (see ‘Sync Mode Select’ ) of the BodyBeat Sync.
In “Master Mode”, pressing and holding the Sync Control Button will initiate a new group.
The “O.R.” icon will appear on the LCD signifying “Open Registration” as well as the Wireless Icon.
During this time the group is open for new members to join. Pressing and holding the Sync
Control button after a new group has been created will toggle in and out of “Open Registration”
mode to control when members may join the group.
In “Sync Mode”, pressing the Sync Control Button once will search for the nearest open group.
If a master unit is found within range and in Open Registration, the “Sync” graphic on the LCD
display will change to “Sync’d” and the Wireless Icon will appear to show signal strength.
SHIFT FUNCTION - In “Master Mode”, pressing this button while holding the Shift button
will display the number of Sync’d units connected to your Master.
Sync Mode Select
Toggles through the three possible metronome modes consisting of “Solo Mode” (independent operation),
“Master Mode” (group leader) and “Sync Mode” (group member). “Master Mode” and “Sync Mode” then
require pressing the SYNC button to activate the selected mode. (see ‘Sync Control’ )
Pressing and holding Sync Mode Select while in Master Mode after a group is established will
destroy the group and return the BodyBeat Sync to Solo Mode.
Pressing and holding Sync Mode Select while in Sync Mode after a group has been joined will
disconnect from the group and return the BodyBeat Sync to Solo Mode.