PowerWalker AS_400 Card 3 - Manual (Page 13)

13
-----------------------------------------------------------------------------
Function Segment Logic
-----------------------------------------------------------------------------
1. Segment 1 Logic, Current Setting(Normal Open)
2. Segment 2 Logic, Current Setting(Normal Open)
3. Segment 3 Logic, Current Setting(Normal Open)
4. Segment 4 Logic, Current Setting(Normal Open)
5. Segment 5 Logic, Current Setting(Normal Open)
6. Segment 6 Logic, Current Setting(Normal Open)
7. Segment 7 Logic, Current Setting(Normal Open)
8. Segment 8 Logic, Current Setting(Normal Open)
0. Exit
-----------------------------------------------------------------------------
Please Enter Number:
Figure14. Logic Segment select menu
Segment 1 ~ Segment 5 for output signal logic setting, and Segment 6 ~ Segment 8 for input
signal logic setting, user can setting “Normal Open” and “Normal Close” type, the default setting is
“Normal Open”
When Figure14. Logic Segment select menu Type 1~6 and press Enter. The menu displays Logic
select menu as below, in this menu select any list number, the menu will return to Figure14. Logic
Segment select menu
-----------------------------------------------------------------------------
Segment 1 Logic
-----------------------------------------------------------------------------
1. Normal Open
2. Normal Close
0. Exit
-----------------------------------------------------------------------------
Please Enter Number:
Figure15. Logic select menu