PowerWalker AS_400 Card 3 - Manual (Page 4)

4
Note:
Segment 7 (PIN14 & PIN1 / USER SW2) is fixed to UPS On function.
Segment 8 (PIN7 & PIN1 / USER SW3) is fixed to UPS Off function.
(Refer to Dry contact Function Section at next page of this document)
We Suggest User do not push down USER SW2 and SW3 at the same time.
If user pushes down USER SW2, AS400 Card will send a UPS On command to UPS.
If user pushes down USER SW3, AS400 Card will send a UPS Off command to UPS.
If USER SW2 and SW3 pushed down at the same time,
AS400 Card will first send UPS On command to UPS, then send UPS Off command to UPS.
And the UPS always follow the last command.
CABLE RJ45 TO DB9 (F)
WIRING TABLE
RJ45 DB9
3 ------------------ 2
4 ------------------ 5
6 ------------------ 3
Figure 3. RS232 Cable