Warning – Peerless-AV ACC912 - Installation User Manual
Page 3
ISSUED: 03-26-03 SHEET #: 055-9213-2 11-10-04
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com
3 of 5
Note: Skip this step if you are
installing an extension column.
Insert flush mount tube from the
top, and thread flush mount tube
into threaded fitting of lower
ceiling bracket (B).
FLUSH MOUNT TUBE
(EXT 002)
B
Drill two 5/32" (4 mm) dia. holes to a
minimum depth of 2.5" (64 mm). Attach upper
ceiling bracket (A) with two #14 x 2.5" (6 mm
x 65 mm) wood screws (F).
Installation to Wood Joist Finished Ceiling,
Exposed Wood Joists, or Wood Beam Ceiling
Flush Mount Tube Application (EXT 002 required)
Installation to Wood Joist Finished Ceiling,
Exposed Wood Joists, or Wood Beam Ceiling
THREADED
FITTING
WALL
CEILING
A
F
• Tighten wood screws so that ceiling plate is firmly
attached, but do not overtighten. Overtightening can
damage the screws, greatly reducing their holding
power.
• Never tighten in excess of 80 in. • lb (9 N.M.).
• Make sure that mounting screws are anchored into the
center of the joist. The use of an "edge to edge" stud
finder is highly recommended.
WARNING