Sena Bluetooth SPH10 v4.2 User's Guide - Manual (Page 12)

13
SPH10
English
support mobile phone bridging over Bluetooth, you can
pair the mobile phone to the GPS to use your mobile
phone. Please refer to the user’s guide of your GPS for
details.
SPH10
Mobile Phone
GPS
HFP
+
(A2DP)
Mobile Phone
Pairing
HFP
GPS Pairing as Mobile Phone
Note:
You have to use a motorcycle specific GPS which
transmits turn-by-turn voice instruction to the headset by
Bluetooth. Most automotive GPS systems don’t have this
feature.
6.5 Pairing with the Sena SR10, Bluetooth
Two-way Radio Adapter
The Sena SR10 is a Bluetooth two-way radio adapter
for group communication, and uses HFP as do most
motorcycle specific GPS navigation systems. If you
pair the SPH10 with a SR10 by multipoint pairing, the
SPH10 is able to have two HFP devices at the same
time: mobile phone and Sena SR10.
1. Turn on the headset and press the Jog Dial for 5
seconds until the red LED is rapidly flashing and
you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then
the LED turns to blue flashing and the beeps turn
to high tone double beeps. You will hear a voice
prompt saying “Multipoint pairing”.
3. Turn on the SR10 and follow the SR10’s “Bluetooth
Headset Pairing” procedure to complete the
process. Please refer to the SR10 user's guide for
details.
4. When the pairing is completed, you will hear a
voice prompt saying “Your headset is paired”.
5. If the pairing process is not completed within three
minutes, the SPH10 will return to stand-by mode.