Zanussi ZDI11002WA - Manual (Page 24)

Problem Possible cause Possible solution
The programme was not applicable for
the type of load and soil.
Make sure that the programme is applica-
ble for the type of load and soil.
Incorrect position of the items in the
baskets. Water could not wash all items.
Make sure that the position of the items in
the baskets is correct and that the water
can easily wash all items.
The spray arms could not turn freely. Make sure that the position of the items in
the baskets is correct and does not cause
the blockage of the spray arms.
The quantity of detergent was not suffi-
cient.
Make sure that you add the correct quan-
tity of detergent in the dispenser before
you start a programme.
There was no detergent in the detergent
dispenser.
Make sure that you add detergent in the
dispenser before you start a programme.
Limescale particles on the
dishes.
The salt container is empty. Make sure that there is dishwasher salt in
the salt container.
The set level of the water softener is in-
correct.
Make sure that the set level of the water
softener agrees with the water hardness in
your area.
The cap of the salt container is loose. Tighten the cap.
Whitish streaks and stains or
bluish layers on glasses and
dishes.
The released quantity of rinse aid is too
much.
Decrease the released quantity of rinse
aid .
The quantity of detergent was too much. Make sure that you add the correct quan-
tity of detergent in the dispenser before
you start a programme.
Dry water drop stains on
glasses and dishes.
The released quantity of rinse aid was
not sufficient .
Increase the released quantity of rinse aid.
The quality of the detergent can be the
cause.
Try a different brand of detergent.
The dishes are wet. • The programme had no drying phase.
• The programme had a low tempera-
ture drying phase.
For better drying results, keep the door
ajar for some minutes.
The dishes are wet and matt. The rinse aid dispenser is empty. Make sure that there is rinse aid in the
rinse aid dispenser.
The quality of the rinse aid can be the
cause.
Try a different brand of rinse aid.
Technical information
Dimensions Width / Height / Depth (mm) 596 / 818-898 / 575
24