Prokit's Industries PT-5201A-B - Manual (Page 3)

Use
To use the different accessories, press the shaft locking button
located to the rear of chuck, unscrew it by hand, fit the chosen
accessories and hand tighten the chuck again.
Accessories
2 pcs sanding bands 6.5x13mm (5) 1 pc nylon bruch (5mm) (6) 1
D
wer
er tools in damp or wet locations.
(1) 2 pcs grinding (3mm) stones (2) 1 pc collet (ø2.4mm) (3) 2 pcs
diamond bits (5mm)
④
pc engraving bit
SAFETY INSTRUCTIONS
IMPORTANT! WHEN USING ELECTRICAL TOOLS, THE
FOLLOWING SAFETY INSTRUCTIONS SHOULD BE OBSERVE
TO PREVENT THE RISK OF ELECTRIC SHOCK, PERSONAL
UR INJ Y AND FIRE. READ AND OBSERVE THESE
INSTRUCTIONS CAREFULLY BEFORE USING THE TOOL.
1. Keep work area clean Cluttered and benches invite injuries.
2. Consider work area environment Do not expose po
tools to rain. Do not use pow
2