Prokit's Industries PT-5201A-B - Manual (Page 7)

6
and on the mandrel
lamp all tolls as short as possible, Shafts, which stick out too far
causing the machine to vibrate.
fore maintenance
AL REPLACEMENT
PARTS. THIS WILL ENSURE THAT THE SAFETY OF THE
POWER TOOL IS MAINTAINED.
band from the mandrel. Place the new sanding b
C
will easily bend
Maintenance
CAUTION: Pull out the plug be
Keep the machine clean
Keep the air vent unimpeded
Do not use the sharp material to clean the machine
Do not let liquid enter into the machine to prevent it from rust
HAVE YOUR POWER TOOL SERVICED BY A QUALIFIED
REPAIR PERSON USING ONLY IDENTIC