ICY DOCK MB882HX-1SB - Manual (Page 4)

English

SSD Xpander installation steps
1.Install the SSD into the SSD Xpander (See Section 4 of the manual for steps)
2.Place the SSD Xpander in a 3.5” drive bay of your choice. Secure the SSD Xpander using
supplied 4 #6-32 screws, or the case’s fastening system.
3.Secure the 3.5" SATA HDDof your choice into another 3.5” drive bay. For convenience, use
a drive bay that is in close proximity to the SSD Xpander so that cabling will be more
manageable.
Make sure the triangle icon on the
cover is in line with the circle icon
on the body, then close the lid.
HDD
4-4 4-5
HDD HDD
5-1 5-2
HDD
SSD Xpander
6
Connect the SATA power connector
from power supply to 2.5”/3.5”HDD
How to remove the SSD
5