ICY DOCK MB882HX-1SB - Manual (Page 8)

English

A:Once the product has been repaired or replaced by Icy Dock or an authorized technician, the
original SSD and HDD can be reconnected to the SSD Xpander to resume the original system
set up.
A: The first way is using the BIOS of your computer or motherboard, as described in the
question 1. The second way is to check that the two partitions are created and that they are
correct size. Partition 1 should be double the capacity of the SSD, and partition 2 should be the
capacity of the HDD minus the size of partition 1. These values may differ between different
operating systems and drive manufacturers.
Material objects shall be referred to for product specifications. Our company has the right to
modify product specifications without further notice.
ICY DOCK will not be liabl for any software, hardware and any data stored with in or
interfacing with our product whichresults to damages or dysfunctions.ICY DOCK will only
be responsible for repairs and services of ICY DOCK’s ownproduct.For any further inquiries
related to ICY DOCK products, please visit http://www.icydock.com
5.Q How can I verify that the SSD Xpander has been successfully integrated with the HDD?
6. Q: I understand this product is designed for SSD+HDD combination, but I’m wondering if I can
use SSD+SSD combination with SSD Xpander?
A: It’s feasible. However, you won’t see any speed advantage from the SSD+SSD combination,
plus you will lose some capacity from the setup, therefore, we don’t recommend using the SSD+
SSD combination with SSD Xpander.
NOTE: