Connection – Xoro HSD 8450 User Manual
Page 67
HSD 8450 15
Engl
ish
Audio Output
Digital Output
This player contains a Dolby Digital or MPEG2 decoder. This enables the playback of DVD
recorded in Dolby Digital, MPEG1/2 audio or linear PCM without an external decoder sup-
ports. When the player is connected to an AV amplifier with 5.1 channel input connectors,
theatre quality audio could be enjoyed at your home at the time of playing disc recorded in
Dolby digital, MPEG1/2 audio or linear PCM.
The "S/PDIF" specifications allow several different types of cables and connectors which
must match the device being used. Key words for the electrical type are "coaxial" and "RCA
jack." The other type is called "optical" with the word "TOSLINK" often used.
1.
Insert the audio plug into the orange socket on the rear side of the device (left from
the S-Video jack), marked with the label “COAXIAL”. Or, insert an optical cable on
the rear side of the DVD player into black quadrangular connector (right from the S-
Video jack), marked with the label “OPTICAL”.
2.
Plug the Audio jack into the corresponding socket on your playback device or your
amplifier.
3.
Choose on the amplifier the correspondent input (optical or coaxial).
Notes:
1.
The cable is not part of the accessories.
2.
Choose right audio setting for this player according to your audio system require-
ment after connection is made.
3.
If the type of the speaker connected does not satisfy the channels recorded in a
MPEG-2 or Linear PCM disc, the disc will not be played in all channels but only in 2
channels (i.e. even if the front speakers and the centre speakers are connected, a
disc recorded in 5.1 channels will be played only in 2 channels.
Caution for the coaxial digital audio output connector:
Do not connect an amplifier with a Coaxial digital input connector which does not contain the
Dolby digital or MPEG audio decoder otherwise it may be harmful to your ears and damage
your speakers.
Stereo Analogue Output
Insert one end of the audio (Cinch [RCA]) cable into the white/red Cinch
[RCA] socket ML/MR AUDIO OUT at the back of the DVD player and the
other end into the audio input socket (usually white/red) on the amplifier
set (usually labelled “AUX IN” or “Stereo IN”. Please also refer to your
Amplifier user manual). Switch on the Amplifier and select the AUX or
Stereo input.
Connection