Miele HS15 User Manual

Page 38

Advertising
background image

Use

Unwinding the cable (dia. 13)

^ Pull the mains cable out to the

required length (max. approx. 7.5 m).

^ Insert the plug in the socket correctly.

Warning: If vacuuming for longer
than 30 minutes, the mains cable
must be pulled out to its fullest
extent. Otherwise there is a danger
of overheating and damage.

Rewinding the cable (dia. 14)

^ Switch the vacuum cleaner off at the

wall socket and unplug it.

^ Press the rewind foot switch briefly.

The cable will rewind automatically.

Switching on and off (dia. 15)

^ Press the On/Off foot control s.

Regulating the suction

The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to
manoeuvre the floorhead.

Some models also have symbols on the
controls. The symbols indicate the type
of use the settings are suitable for.

The setting selected will light up yellow.

# - curtains, lightweight fabrics
$ - upholstery, cushions
% - thick pile carpets, rugs and

runners

* - for daily energy-saving vacuuming

(this setting is also very quiet)

( - loop-pile carpets
) - hard flooring and for intensive

cleaning of carpets

Warning: When using the AirTeQ
floorhead, if the suction seems too
high, reduce the suction until the
floorhead is easier to manouevre.

Depending on the model, your vacuum
cleaner will be fitted as standard with one
of the following suction power selectors:

+ /- foot controls (dia. 16)

The first time the vacuum cleaner is
switched on, the highest power setting
will be selected automatically.

After that, the vacuum cleaner will
switch on at the setting which was used
previously.

^ Press the + foot control to select a

higher setting.

^ Press the - foot control to select a

lower setting.

Foot controls with Automatic
(dia. 17 + 18)

The first time the vacuum cleaner is
switched on, the "Auto" power setting
will be selected automatically.

Auto = suction power is automatically

adjusted for the type of floor
being vacuumed

Warning: Do not use the "Auto"
setting to vacuum lightweight
materials or curtains. These could be
sucked in and possibly damaged.

en

38

Advertising