Miele HS15 - Manual (Page 44)

^ Close the filter grille.
^ Close the dust compartment lid.
How to replace an Active Air Clean
filter or an Active HEPA filter (dia. 38
+ 39)
Do not use more than one exhaust
filter at a time.
^ Open the dust compartment lid.
^ Raise the filter and remove it.
^ Replace with a new filter, and push it
down into place.
If you wish to use an Air Clean filter,
see "Replacing one type of exhaust
filter with another".
^ Close the dust compartment lid.
Resetting the exhaust filter change
indicator (dia. 35)
If your vacuum cleaner is fitted with an
exhaust filter change indicator, this
needs to be reset each time the filter is
replaced. To do this the vacuum
cleaner must be switched on.
^ Press the reset button.
The exhaust filter change indicator will
go out and reset to zero.
The filter change indicator can only
be reset by pressing the reset
button after the light has come on.
Pressing the button at any other time
will have no effect.
Replacing one type of exhaust filter
with another (dia. 34)
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
a Air Clean
b Active Air Clean SF-AAC 50 (black)
c Active HEPA SF-AH 50 (blue)
Please note:
1. If you wish to replace the Air Clean
filter a with an Active Air Clean filter b or
an Active HEPA filter c, it is essential
that you remove the filter grille before
fitting the new type of filter.
2. If you wish to replace the Active Air
Clean filter b or the Active HEPA filter c
with an Air Clean filter a, then it is
essential that you also fit the filter grille *,
see dia. 37.
* Filter grille - see "Optional
accessories".
Do not use more than one exhaust
filter at a time.
The exhaust filter change indicator
light that is fitted on certain models,
see dia. 35, is designed to come on
when the Active Air Clean or Active
HEPA filter needs to be changed.
The filter change indicator light is
irrelevant if an Air Clean filter is
being used, as long as it is replaced
every time a new packet of Miele
dustbags is started. The indicator
light will go out when the reset
button is pressed.
en
44