Crown Audio DBC Network Bridge - Manual (Page 39)

DBC Network Bridge
Operation Manual page 39
4.7.12 Scenes
Click on the Unit Scenes tab to open the Scenes window (Figure 4.18).
Remember that an object is a software processor in the DBC Bridge. There are
times when only a few objects’ settings need to be changed and this is the
function of 'Scenes'. DBC Network Bridge Scenes allow up to 50 objects to be
grouped together and changed to a specific state with a single command. Like
Presets, Scenes can be changed from the front panel, a Control Port Input, or a
scheduled 'Event'.
Each Scene has a 32 character label associated with it and the Scene Editor
allows the objects to be selected and configured for each Scene. Note: These
‘unit’ Scenes should not be confused with the IQwic equivalents that are saved
as .SIQ files, and are handled quite differently with a different scheduler.
In any channel, click on the Edit button to open the Scene Editor window
(described on the next page).
4 Operation
Figure 4.18 Scenes Window