Crown Audio DBC Network Bridge - Manual (Page 48)

Operation Manual
DBC Network Bridge
page 48
5.2.4 Control Port
The Control Port provides a means for external monitoring and control
of ‘objects’ (software processors) within the DBC Network Bridge. It can
be used to turn peripherals on and off, send signals to other system
components, receive digital and/or analog signals from other compo-
nents, and indicate status of the input gates.
The Control Port implements sixteen outputs and sixteen inputs along
with power supply outputs and common grounds. Eight of the outputs
are digital ‘logic outs’, while the other eight are analog outputs that are
capable of digital ‘logic outs’. Eight of the inputs (AIN1-8) are capable of
monitoring digital and analog external signals. The other eight inputs
(DIN1-8) are digital only.
To open the Control Port window (Figure 5.4), click on the Control
Port tab in the main window.
In the following pages, we will look at each section of the Control Port
window:
1. Digital Inputs
2. Digital Outputs
3. Analog Inputs
4. Analog Outputs
Figure 5.4 Control Port Window
1
2
3 4
5 Advanced Operation