An-130+ speaker monitor owners manual – Anchor Audio AN-130+ Speaker Monitor User Manual

Page 3

Advertising
background image

MADE IN USA

SIX YEAR WARRANTY

AN-130+ Speaker Monitor Owners Manual

3

NOTE: If the system is not responding be sure the signal is not blocked.

WIRELESS REMOTE CONTROL
REMOTE OPERATION

(AN-130RC+ ONLY)

Point the red Mute button towards the front
of the AN-130RC+, aiming the remote at
the red window located near the Volume and
Tone controls.

• Raise volume by pressing Volume Up
• Lower volume by pressing Volume

Down

• Mute system by pressing Mute
• Stop mute by pressing Mute again or

pressing either volume button

REPLACING THE REMOTE BATTERY

1. Locate the latch on the bottom of the

remote, near the back

2. Gently pull the latch towards the

center of the remote

3. Slide out the battery holder carefully
4. Place a new battery in holder with

positive symbol on the battery
facing up

5. Carefully re-insert the battery holder

VOLUME

DOWN

MUTE

VOLUME UP

BATTERY

REMOTE CONTROL

BOTTOM

BATTERY

HOLDER

NOTE: Use only CR2025 or CR2032 type batteries.

Advertising