Anchor Audio AN-135+ Speaker Monitor - Manual (Page 2)

MADE IN USA
SIX YEAR WARRANTY
AN-135+ Speaker Monitor Owners Manual
2
BACK PANEL OF AN-135+ ARChITECTS’ SPECIFICATION
NOTE: When connecting multiple AN-135+ units (daisy chaining) stereo cable
MUST be used to avoid interference.
POWER ON
LINE IN/LINE OUT
(3.5 MM)
LINE IN
(1/4” PHONE)
The speaker shall be an Anchor AN-135+ or equivalent.
The general construction shall include an injection-
molded case, one 4.5” Neodymium woofer and input
terminations consisting of both 3.5 mm and 1/4” phone.
The maximum speaker dimensions shall not exceed
5.25” high, 8.4” wide and 9” deep. The maximum
weight shall be 3.5 pounds.
The case shall be formed by injection-molded ABS, and
shall have a finish of black or white.
The speaker has the ability to be mounted on walls,
ceilings, equipment racks and speaker stands with
appropriate hardware and accessories.
Waste electrical and electronic products must not be disposed of with
household waste. Please recycle where facilities exist. Check with
your Local Authority or Retailer for recycling advice.
SB-3BK+
40° tilt bracket
A multi-purpose bracket used
for mounting the AN-135+ to
a wall or ceiling.
SB-360BK+
360° swivel bracket
A multi-purpose bracket used for
mounting the AN-135+ to a wall
or ceiling.
MOUNTING BRACKETS