Control functions – PolyPlanar RD44 User Manual

Page 3

Advertising
background image

1352 Charwood Road • Suite D • Hanover, MD 21076 • Tel (410) 761-4000

www.polyplanar.com

3

1 Microphone: Waterproof intercom microphone.

2

Intercom Switch: Hold down to talk. Release to hear. The intercom
will override the music in the other zones. It will also disable a muted
RD-44 in another zone while the switch is pressed.

The volume for each zone with an RD-44 is adjustable. While holding
the “Mic” button (# 2) down , use the Volume knob (9) to toggle the
intercom volume up or down. (See Volume, # 9). The Master zone
intercom volume is set using a potentiometer on the RT-20 Router (See
RT-20 Instructions
)

3

Presets: Tune to a desired AM, FM 1, FM2 or XM (optional) station and
hold the desired preset button for at least 2 seconds. The display will
change to show which preset was programmed.

4

Display: Allows setting of display modes. Times out after 2 seconds.
Displays available information from WMA, MP3 or XM formats. Pressing
the button advances the display functions.

In CD Mode: x1 = Artist x2 = Album x3 = Folder x4 Track /Time

In XM Mode:
x1 = Artist x2 = Song x3 = Category

5

Up: Tunes Radio frequencies or changes tracks higher.

6

Down: Tunes Radio frequencies and changes tracks lower.

7

Band Select: Choose between AM 1, AM 2 and FM 1, FM2, FM 3
station banks.

8

Scan: AM/FM mode. Tunes and stops at available stations for a few
seconds. Press scan a second time or one of the tune buttons to stop
scanning.

9

Volume: Adjusts volume by toggling the knob right or left. Turn to the
left and hold to decrease volume or right and hold to increase volume.
This knob is self-centering.

10 Auto Station Set: Scans for strong stations and stops. Pressing the

button again will select the next station up. The receiver will scroll up
the frequency scale and begin again at the bottom.

Control Functions

Advertising