SENA HD132x Series - Manual (Page 20)

HD132x Series User Manual
20
address is labeled on NIC (Network Interface Card) of the HelloDevice, and the user specifies an IP
address. Consult your network manager for correct network information.
Now, let’s assign an IP address with the HelloDevice Utility Software step-by-step.
(1) Launch the HelloDevice Utility Software and select [IP Address] tab.
In [IP Address] window, you can set an IP address using DHCP server function ([DHCP Start],
[DHCP Stop]), and you can trace and clear the IP address ([IP Find], [IP Clear]).
Figure 4.7 [IP Address] Window
(2) Press [Server Setting] button to set parameters of the DHCP server.
In DHCP server setting window (Figure 4.8), you need to enter is [Router] information of the IP
address.
[DHCP Server IP] automatically displays the IP address of the user PC where the HelloDevice Utility
Software is installed.
DHCP Server Function IP Address Search/Remove Function
DHCP Database list
DHCP Database
Management Function