SENA HD1100 User Manual
Page 26
Starter Kit and User Manual for the HelloDevice 1100
23
(3) When uploading is completed, run the Web browser and connect to the
http://192.168.1.15/index.html
. The following
I/O demo Web page will appear. This screen matches the switches and LED's on the demo board. Switch and LED mapping
is described in Figure 5.12.
Figure 5.11. Web page screen of digital I/O demonstration
(4) Checking digital output control: Buttons on the left side of Web page are used to issue the digital output
commands (the number show the output contact points). When the user presses the “0” on the Web page, the
LED 0 on the demo board will be toggled on and toggled off when pressed again.
(5) Checking digital input detection: The LED’s on the right side of the Web page are used to display digital
input, and match the switches on the demo board. Check to see if the LED color is changed from red to green by
pressing the switch on the demo board.