2 ssl data transfer using certificate – SENA Device Server and Serial_IP Application Guide User Manual
Page 20
Advertising
4.2 SSL Data Transfer using certificate
4.2.1 Supported Models
HelloDevice PS110/PS410/PS810, SS100/SS110/SS400/SS800, and
STS800/STS1600
4.2.2 Sena Device Server Configuration
-
Set the Encryption method serial port #1 of Sena Device Server as follows
?? SSL v3, SSLv3 rollback to V2, TLS v1
-
Select the “Samplecert.pem” certificate file from Serial/IP folder and upload.
-
Select the “Samplecert.pem” Key file from Serial/IP folder and upload.
-
Set the Key file password.
-
Upload the “Samplecert.pem” CA certificate list file from Serial/IP folder.
-
Enable/Disable cipher suite.
-
Set the Host mode according to the Server and Client operation modes.
-
Advertising