SENA Device Server and Serial_IP Application Guide - Manual (Page 6)

1.3 Screenshot
- Configuration of COM x: Enter the IP address and Local Port number of Sena Device
Server when working in Client mode.
- Accept Connections: Enter the listening port number when working in Server mode.
- Configuration Wizard: The Configuration Wizard determines whether the Serial/IP
Redirector can communicate with the Sena Device server using the following settings
for a Serial/IP COM port: IP Address of Server, TCP Port Number and Credentials.
- Connection Protocol: Set the TCP/IP protocol that Sena Device Server uses for
communication.
- COM port Option: These settings allow control of the respective signals as presented to
the user application by the redirector.
- Security: Set the Security protocol
- Select Port: Allows user to create or delete of Virtual COM Ports.
- Port Monitor: User can monitor the data communication between user application and
Sena Device Server.
- Licensing: License information of Serial/IP software that Sena bundles.
- Advanced: The Advanced button opens a dialog for settings of specialized features
such as SSL Encryption, SSL Authentication, and SSL Certificate.