SENA HelloDevice UniversalComm - Manual (Page 11)

11
5. Test operation
Using the HelloDevice UniversalComm (user PC) and the HelloDevice, users can test
the communication between PC and the HelloDevice both in TCP mode and in RS232 mode.
The test scenario is as follows.
- Create TCP session in one program instance and the RS232 connection in the other
instance.
- Transfer data back and forth between both HelloDevice UniversalComm (User PC in
TCP and RS232) and the HelloDevice Communication
5.1. Connections
- Before starting the test, users have to prepare the followings.
! HelloDevice: One of 1320E, LS100, PS100/200/400 and SS100/110/400/800
! RS232 serial cable
! User PC connected to the network
! HelloDevice UniversalComm program
1) Hook up the RS232 serial cable between COM1 of PC and the serial port of the
HelloDevice.
2) Hook up the Ethernet cable to the HelloDevice.