SENA Promi-MSP Quick Install User Manual
Page 5
Advertising
7
In this step you can configure Promi-SD and register it to Promi-MSP.
Set Baudrate, Parity, Stopbit and Hardware flow control to fit Promi-SD to serial interface of
your equipment. Then, press ‘Register’.
In the above case, for example, Promi-SD will be configured as 9600-8N1-HW, operated in
Mode 1. You can reach Promi-SD at TCP 10000 port of Promi-MSP.
Proceed to next step.
5
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Advertising