SENA Promi-MSP Quick Install User Manual
Page 8
Advertising
Then Serial/IP Control Panel will appear. Firstly, press ‘Select Ports…’ to add virtual COM ports.
Select as many COM ports as you need. (i.e., as many as Promi-SDs you registered)
Added COM port (COM15) will appear on the list. Click COM port and select preset from
Presets, which are named after Promi-SD, for each COM port. In this way, Promi-SD is tied to
8
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Advertising