SENA HD1200 - Manual (Page 11)

Starter Kit and User Manual for the HelloDevice 1200
8
4. Setting Up the Hardware
The HelloDevice 1200 is as follows:
!" Install the HelloDevice Utility Software on user's PC
!" Connect the HelloDevice to the power supply and Ethernet
!" Set the IP address of HelloDevice
!" Check the HelloDevice network connection.
4.1 Installing Utility Software
Run setup1x00.exe in the HelloDevice CD-ROM from the PC that is connect to the network. Setup1x00.exe can
be run in Microsoft Windows 95/98, NT and 2000. Select [Complete] and press [Next] button in the setup type
display screen.
Figure 4.1. Initial screen of the HelloDevice utility software installation program