SENA HD1200 - Manual (Page 18)

Starter Kit and User Manual for the HelloDevice 1200
15
(6) Use the ping command to check your IP address setting of HelloDevice.
Run the ping program at the command prompt. If your IP address is correctly set, the response to the ping will be
as follows:
>> ping 192.168.1.15
>> Pinging 192.168.1.15 with 32 bytes of data:
Reply from 192.168.1.15: bytes=32 time=10ms TTL=251
Reply from 192.168.1.15: bytes=32 time<10ms TTL=251
Reply from 192.168.1.15: bytes=32 time=10ms TTL=251
If the response above is not displayed, the IP address was not entered correctly, so you should repeat steps (4),
(5) and (6).
(7) Use [IP Find] to identify IP address setting of HelloDevice.
Click [IP Find] button, and the window in figure 4.10 will be shown. Enter the MAC address of HelloDevice and
click [Find] button. The IP address currently set in the “Found IP” item will be displayed.
Figure 4.10 IP address check using the [IP Find] function
(8) Check if the HelloDevice web server operates correctly.
The HelloDevice has a built-in 404.html file in flash memory (factory default). To check the functions of your
web server, run any web browser and connect to the address http://192.168.1.15 . The web page in Figure 4.11
verifies that the HelloDevice works successfully as a web server.