Aqua-Pure MCA2001M - Manual (Page 19)

7-1
SECTION 7: SPECIFICATIONS & OPERATING DATA
ITEM MCA1001
MCA1001M
MCA1501
MCA1501M
MCA2001
MCA2001M
Nominal Media Volume, cu. ft. (cu. mtr.) (1) 1.0 (0.03) 1.5 (0.04) 2.0 (0.06)
Gravel Underbed, lbs. (kg) 13 (5.9) 13 (5.9) 18 (8.2)
Nominal Capacity, (ppm-gal) 30,000 45,000 60,000
Flow Rates, gpm (lpm) (2)
Service (10 min. or less)
5 (18.9) 6 (22.7) 7.0 (26.5)
Pressure Loss @ Flow Rates, psi (kPa)
Continuous (no duration limit)
Service (10 min. or less)
Backwash Flow Rate, gpm (lpm) (3)
2 (13.8)
5 (34.5)
5.0 (18.9)
2 (13.8)
7 (48.3)
5.0 (18.9)
2 (13.8)
8 (55.2)
7.0 (26.5)
Inlet/Outlet Pipe Size, inches (cm) (4)
Media tank Diameter x Height, inches (cm) 10 x 44
(25.4 x 111.8)
10 x 54
(25.4 x 137.2 cm)
12 x 53
(30.5 x 132 cm)
Minimum Space Required, inches (cm)
Width
Depth (w/Bypass)
Height (Including Valve)
12 (30.5)
16 (40.6)
56 (142.2)
12 (30.5)
16 (40.6)
75 (190.5)
12 (30.5)
16 (40.6)
75 (190.5)
Approximate Shipping Weight, lbs. (kg) 157 (71.2) 210 (95.2) 264 (119.7)
Maximum operating temperature 100º F (38º C)
Electrical requirements 110V/60Hz
Operating pressure 20-100 psi.
Specifi cations are subject to change without notice.
NOTES:
1) Replenishment of pH adjusting component of media may be required periodically, the frequency of which is dependent on raw water pH, manganese
concentration and water consumption rate. Consult dealer for more information..
2) For satisfactory performance, indicated durations should not be exceeded. Flow rates specifi ed are adequate for normal residential applications.
Do not use Service or Peak fl ow rates if treated water is to supply a geothermal heat pump, swimming pool, etc. (contact dealer before selecting
equipment). Service fl ow rates have been tested against NSF Standard 42 and have a rated pressure drop of less than 10 psi.
3) For system to operate properly, pumping rate of well pump MUST be suffi cient to backwash unit at rate specifi ed.