Aqua-Pure CBW1001 - Manual (Page 15)

6-1
SECTION 6: SPECIFICATION AND OPERATING DATA
ITEM CBW1001 CBW1501 CBW2001
Nominal Media Volume, cu. ft. (cu. mtr.) 1.0 (0.03) 1.5 (0.04) 2.0 (0.06)
Gravel Underbed, lbs. (kg) 18 (8.2) 18 (8.2) 25 (11)
Flow Rates, gpm (lpm) (2)
Service (10 min. or less)
5.0 (18.9) 6.0 (22.7) 7.0 (26.5)
Backwash Flow Rate, gpm (lpm) (2) 5.0 (18.9) 5.0 (18.9) 7.0 (26.5)
Inlet/Outlet Pipe Size, inches (cm) 1 (2.5)
Media tank Diameter x Height, inches (cm)
10 x 44
(25.4 x 111.8)
10 x 54
(25.4 x 137.2)
12 x 52
(30.5 x 132)
Minimum Space Required, inches (cm)
Width
Depth (w/Bypass)
Height (Including Valve)
12 (30.5)
16 (40.6)
56 (142.2)
12 (30.5)
16 (40.6)
75 (190.5)
12 (30.5)
16 (40.6)
73 (185)
Approximate Shipping Weight, lbs. (kg) 62 (28) 68 (31) 71 (32)
Maximum operating temperature 100º F (38º C)
Electrical requirements 110V/60Hz
Operating pressure 20-100 psi.
Specifi cations are subject to change without notice.
NOTES:
1) For satisfactory performance, indicated durations should not be exceeded. Flow rates specifi ed are adequate for normal residential applications. Do
not use Service or Peak fl ow rates when sizing commercial applications or if treated water is to supply a geothermal heat pump, swimming pool,
etc. (contact dealer before selecting equipment). Service fl ow rates have been tested against NSF Standard 42 and have a rated pressure drop of
less than 10 psi.
2) For system to operate properly, pumping rate of well pump MUST be suffi cient to backwash unit at rate specifi ed.