Aqua-Pure APPM150 - Manual (Page 7)

3-1
SECTION 3: INSTALLATION
Proper installation sequence of water conditioning equipment is very important.
Refer to the diagram following for your particular water supply.
BRINE
TANK
SOFTENER
(OPTIONAL)
SOFTENER
(OPTIONAL)
IRON
REDUCTION
FILTRATION
SYSTEM
FILTERED WATER
FILTERED
SOFT WATER
TANK
AERATION
SWITCH
PRESSURE
RAW
WATER
RAW
WATER
FS1 FLOW SWITCH
UNTREATED
WATER
UNTREATED
WATER
UNTREATED
WATER
WATER
RAW
METER
TANK
PUMP
PRESSURE
SWITCH
PRESSURE
TANK
PRESSURE
IRON
REDUCTION
FILTRATION
SYSTEM
PRESSURE
REGULATOR
(NOT SUPPLIED)
PRESSURE
REGULATOR
(NOT SUPPLIED)
FS1 FLOW SWITCH
CHECK VALVE
CHECK VALVE
CHECK VALVE
BRINE
TANK
FILTERED WATER
FILTERED
SOFT WATER
TANK
AERATION
BRINE
TANK
FILTERED WATER
FILTERED
SOFT WATER
TANK
AERATION
FS1 FLOW SWITCH
PRESSURE
REGULATOR
(NOT SUPPLIED)
TYPICAL INSTALLATION
SPLIT STREAM INSTALLATION
PUBLIC WATER SUPPLY INSTALLATION
CAUTION CAUTION
To reduce the risk associated with property damage due to plugged water lines:
• Pay particular attention to correct orientation of control valve. Water fl ow should match arrow on control valve. The Inlet and Outlet of other water
treatment equipment products will vary depending on the control valve brand used.
FIGURE 1