Authorization – Universal Audio UAD SYSTEM ver.6.3.2 User Manual
Page 22
UAD System Manual
- 22 -
Chapter 2: UAD Installation
7.
Hold the card gently by the top edges, and line up its connector with the slot
inside the computer.
8.
When the connector and slot are aligned, press the card into the slot with
firm, even pressure. The card should “pop” into place. The top of the slot on
the motherboard should be flush and parallel with the edge of the UAD
card.
9.
Secure the card with the previously removed screw.
10.
Replace the computer case.
Hardware installation is now complete. Proceed to Authorization in the next section.
Authorization
Your UAD device must be registered at my.uaudio.com to download an au-
thorization file, and you need a my.uaudio.com account to register the de-
vice. These steps are detailed in the
“Authorize Plug-Ins Procedure” on
Important:
All UAD plug-ins must be authorized before they can be used
(unauthorized plug-ins can be used in demo mode for 14 days without autho-
rization). Authorization is accomplished by clicking the “Authorize Plug-Ins”
button in the UAD Meter & Control Panel application. The procedure is in the
next section.
Figure 2. UAD-2 card installation in PCIe slot.