Procom MU 4-xg-... - Manual

MU 4-XG/...
Collinear 4 dB Mobile Antenna for the 450 MHz Band with
GPS
DESCRIPTION
External antenna whip mounted on the XG-mount.
4 dB mobile antenna with collinear, stainless steel whip.
Stainless steel XG-mount with M6-thread whip-fastening system.
Choice between mounts with FME-connection (without cable) or
models with permanently attached 4 m cable with FME connector.
Easily removable whip for car wash.
GPS-antenna for fixed installations.
Full hemispherical coverage.
Built-in high-gain, low-noise amplifier.
Right-Hand Circular Polarization (RHCP).
2.85 V - 5 V supply voltage (typical 3 V).
ORDERING DESIGNATIONS
XG-MOUNT (OBLONG) WITH FME [MHZ] PROCUCT NO.
Models for general application -
tunable with adjustment disc:
TUNING
MU 4-XG/s 380...410 130002033
MU 4-XG/f 406...430 130002034
XGP4-MOUNT (OBLONG) WITH
4 M CABLE AND FME-CONN.
[MHZ] PROCUCT NO.
Models for general application -
tunable with adjustment disc:
TUNING
MU 4-XGP4/s 380...410 130002035
MU 4-XGP4/f 406...430 130002036
SPECIFICATIONS
ELECTRICAL
MODEL MU 4-XG/...
ANTENNA TYPE Collinear stainless steel mobile whip antenna
FREQUENCY Models within 380 – 470 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 4 dB (acc. to EIA RS-329-1)
BANDWIDTH > 15 MHz @ SWR ≤ 1.5
SWR ≤ 1.3 @ f. res.
MAX. POWER 100 W
MECHANICAL
MATERIALS Whip:
Black-chromed stainless steel
Black-chromed brass
Mount:
Black-chromed brass
Weather- and shockproof plastics
Stainless steel
RECOMMENDED
INSTALLATION
TORQUE
4 ± 1 Nm
COLOUR Black
HEIGHT Approx. 59 cm (dep. on freq.)
WEIGHT XG-version: Approx. 155 g
XGP4-version: Approx. 295 g
MOUNTING 18 mm dia. hole
ELECTRICAL FOR GPS-PART
OPERATING FREQUENCY 1575.42 ±1.023 MHz
LNA GAIN 22 dB ±2 dB
NOISE FIGURE Max. 1.5 dB (typical 1.1 dB)
VOLTAGE DC 2.85 V ~ 5 V (typical 3 V)
CURRENT ≤ 20 mA
IMPEDANCE Nom. 50 Ω
MECHANICAL
CONNECTOR Cable: RG 178, length 150 mm
Connector: FME-male