GE Industrial Solutions EntelliGuard G Drawout Secondary Disconnect - Manual (Page 2)

Figure 3. Screws assembly
Figure 4. Screws assembly
4. Push the secondary disconnect block toward
the back of the mounting plate of the breaker and
ensure it is inline with the first block as shown in
fig 5.
Figure 5. SD assembly
Installation of Cassette side Secondary
disconnect:
1. Remove the screw shown in the fig 6.
Figure 6. Removing the screw
2. Assemble the label as shown in the fig 7.
Figure 7. Label assembly
3. Assemble the new SD block as shown in fig 8 &
9.
Figure 8.
2