GE Industrial Solutions Spectra Series Power Panelboards SE, SF, TE, TF, TQ, and TEL User Manual
Page 2
4. Install the space fillers
to any holes in the filler plate
with no breakers mounted behind.
For SE, SF, TFJ, TFK, THFK, and TFL breakers, use
the steel space filler and two #10 x
3
/
8
" screws,
tightened to 25 in-lb, as shown in Figure 3.
For TEB, TED, THED, TQD, THQD, and TEL
breakers, use the plastic space fillers. Install the filler
from the underside of the breaker cover. Engage the
slotted end of the space filler with the inside edge of
the opening in the breaker cover. Secure the other
end in place with a #10 x
7
/
8
" screw, tightened to 15
in-lb, as shown in Figure 4.
5. Install the assembled breaker cover
over the flexible
prongs on the filler supports, as shown in Figures 5
and 6.
Figure 3. Installing the steel space filler for SE, SF, TFJ, TFK, THFK,
and TFL breakers.
Figure 4. Installing the plastic space fillers for TEB, TED, THED, TQD,
THQD, and TEL breakers.
These instructions do not cover all details or variations in
equipment nor do they provide for every possible contingency that
may be met in connection with installation, operation, or
maintenance. Should further information be desired or should
particular problems arise that are not covered sufficiently for the
purchaser’s purposes, the matter should be referred to the GE
Company.
Figure 5. Breaker cover installed on the filler supports for SE, SF, TFJ,
TFK, THFK, and TFL breakers.
Figure 6. Breaker cover installed on the filler supports for TEB, TED,
THED, TQD, THQD, and TEL breakers.
CAUTION:
To ensure secure mounting, push the breaker
cover completely over the four flexible prongs on top of
the filler supports, as shown in Figure 7.
Figure 7. Breaker cover securely mounted on the flexible prongs.
NOTE:
Push-on breaker covers may bend if not removed
properly. Pull the upper edge of the breaker cover off the
flexible prongs, then pull the lower edge free.
g
GE Industrial Systems
General Electric Company
41 Woodford Ave., Plainville, CT 06062
DEH042 R03 0801
© 2001 General Electric Company